100-inch Thorn Assembly

Previous Home Next

1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27

f-hacksaw

I love doing this... thanks to the balsa spacer, sawing the wing in half through the joiner tubes was quick and easy. Now it was time to sand the wing surfaces and applying wood preservative. Andreas prepped the wings very well in his shop, and only minor sanding (I used 220 grit) was needed to get the wings nice and smooth.